Loading ...
Loading ...
Loading ...
25
Installation
Configuring the Control options
The CONTROL menu allows you to
select and configure the settings and
options for :
– ESP (Energy Saving Programmability)
– Digit Timeout
– 3 Digit Entry
– Source Menu Item
– Channel Guide
– Minimum Volume
– Maximum Volume
• Press the > button to enter the
CONTROL menu.
CHANNEL INSTALL
CONFIGURATION
SWITCH ON / OSD >
PICTURE / SOUND >
SECURITY >
CONTROL >
VIDEO ADJUSTMENTS >
FEATURES >
CC / V-CHIP >
• Press the < > buttons to select the
item you want to configure.
CHANNEL INSTALL
CONTROL
ESP OFF
DIGIT TIMEOUT 3 . 0
3 DIGIT ENTRY NO
SOURCE MENU ITEM NO
CHANNEL GUIDE NO
MIN VOLUME 10
MAX VOLUME 35
4.
• The ESP (Energy Saving
Programmability) option allows you
to select a specified period of time
(from 1 HR / 2 HR ......... / 99 HR) to
power down your TV automatically. If
it does not receive any commands
during this period from the remote
control or the TV keyboard, this
energy saving feature will take effect.
Note : If a remote or keyboard
command is received before the ESP
time period expires, the Timer will
reset and begin counting down again.
CHANNEL INSTALL
CONTROL
ESP 2
DIGIT TIMEOUT 3 . 0
3 DIGIT ENTRY NO
SOURCE MENU ITEM NO
CHANNEL GUIDE NO
MIN VOLUME 10
MAX VOLUME 35
• The DIGIT TIMEOUT option
allows you to specify a time period
(from 1 second to 9.9 seconds) for
the channel to switch to another
channel when you key in the channel
number. It is advisable not to specify
too short a time period especially
when you want to key in 2 digit
channel number. For example, if you
specify a 1 second time period, you
may not have enough time to key the
second digit as the channel will switch
after you key in the first digit.
Note : The recommended and default
setting is 3.0 seconds.
Loading ...
Loading ...
Loading ...