Loading ...
Loading ...
Loading ...
Version 07/11 - Page 8
FOR DUCTLESS INSTALLATIONS
Ductless installations require a Ductless Conversion Kit
whose components are pictured in FIGURE 8. Do not use
the DAMPER (G in FIGURE 1) for ductless installations.
(B in FIGURE 1) should
be discarded and replaced by a new one with holes (1 in
FIGURE 8).
1. As indicated in FIGURE 8
(5)
(4)
DIVERTER.
2(6) behind the center grease
in FIGURE 9.
1. LOWER CHIMNEY DUCTLESS
2. LEFT VENT GRID
3. RIGHT VENT GRID
4. DIVERTER EXTENSION HORIZONTAL (2 PIECES)
5. DUCTLESS DIVERTER
6. CHARCOAL FILTER
FOR ALL INSTALLATIONS
1.
-
green screw provided. Attach the White lead of the power supply
to the White lead of the rangehood with a twist-on type wire con-
Replace the cover.
2.(C in FIGURE 10) by slightly
(E)
(G).
3.(B) by slightly widening
(A) (G).
FIGURE 10
FIGURE 8
FOR DUCTLESS
INSTALLATIONS
Fit the LEFT AND RIGHT
VENT GRIDS (2 and 3)
sure that the directional
symbols are towards the top
and front of the hood and that
they connect snugly to the
FIGURE 9
FIGURE 11
Loading ...
Loading ...
Loading ...