Loading ...
Loading ...
Loading ...
Black plate (501,1)
北米Model "A8200BE-B" EDITED: 2014/ 4/ 23
& Rear combination lights
1. Using a Phillips screwdriver, remove
the upper and lower screws that secure
the rear combination light assembly.
2. Slide the rear combination light as-
sembly rearward and remove it from the
vehicle.
1) Stop/tail light (This light is also used as
the rear side marker light.)
2) Backup light
3) Rear turn signal light
4) Tail light
3. Remove the bulb socket from the rear
combination light assembly by turning it
counterclockwise.
4. Pull the bulb out of the bulb socket and
replace it with a new one.
5. Set the bulb socket into the rear
combination light assembly and turn it
clockwise until it locks.
1) Guide pins
2) Clip
6. Put the rear combination light assem-
bly into place while aligning the 2 guide
pins and a catch with the guide holes and
a clip on the vehicle.
Maintenance and service/Replacing bulbs
11-43
– CONTINUED –
11
Loading ...
Loading ...
Loading ...