Loading ...
Loading ...
Loading ...
Black plate (499,1)
北米Model "A8200BE-B" EDITED: 2014/ 4/ 23
greasy gloves, fingerprints or
grease on the bulb surface will
develop into hot spots, causing the
bulb to break. If there are finger
prints or grease on the bulb surface,
wipe them away with a soft cloth
moistened with alcohol.
NOTE
. If headlight aiming is required, con-
sult your SUBARU dealer for proper
adjustment of the headlight aim.
. It may be difficult to replace the
bulbs. Have the bulbs replaced by your
SUBARU dealer if necessary.
Perform the following steps to replace the
bulbs.
Low beam headlight
High beam headlight
1. Disconnect the electrical connector
from the bulb.
Low beam headlight
High beam headlight
2. Remove the bulb from the headlight
assembly by turning it counterclockwise.
3. Replace the bulb with new one. At this
time , use care not to touch the bulb
surface.
4. To install the bulb to the headlight
assembly, turn it clockwise until it clicks.
5. Reconnect the electrical connector.
Maintenance and service/Replacing bulbs
11-41
– CONTINUED –
11
Loading ...
Loading ...
Loading ...