Loading ...
Loading ...
Loading ...
Black plate (122,1)
北米Model "A8200BE-B" EDITED: 2014/ 4/ 23
2-28
Keys and doors/Windows
CAUTION
After fully opening or fully closing a
window, do not continue to push the
switch in the same direction. It may
cause the power window to mal-
function.
NOTE
. Due to the structure of the vehicle
body, the rear seat window cannot be
fully opened.
. When the following operations are
performed, the power window breaker
will operate and it may not be possible
to open or close the window.
– After the driver’s side window is
fully closed or fully opened, the
switch continues to be operated in
the same direction for a few sec-
onds.
– After the windows for three or
more seats are fully closed or fully
opened, each switch continues to
be operated in the same direction
simultaneously for a few seconds.
. In this case, after the breaker re-
covers, be sure to initialize the power
windows. If they are not initialized, the
one-touch auto up/down function will
not operate. Refer to “Initialization of
power window” F2-31.
The power windows operate only when
the ignition switch is in the “ON” position.
& Power window operation by
driver
! Driver’s side power window
switches
1) Lock switch
2) For driver’s window (with one-touch auto
up and down feature) (if equipped)
3) For front passenger’s window
4) For rear left window
5) For rear right window
All door windows can be controlled by the
power window switch cluster at the driver
side door.
! Operating the driver’s window
1) Automatically open/close
2) Open/close
To open:
Push the switch down lightly and hold it.
The window will open as long as the
switch is held.
NOTE
If you continue to hold the AUTO
switch in the down position after the
wind ow has been fully opened, the
circuit breaker may activate for a short
time and the window may not operate.
Allow several seconds for the system
to reset without touching the switch,
and the window will begin to operate
normally on its own.
Loading ...
Loading ...
Loading ...