Loading ...
Loading ...
Loading ...
13
Set Up Your System
Camera
LED
Color and Action Meaning
Solid blue The camera is connected to the Quick Charge 5V power
adapter and is fully charged.
Fast blinking blue for 3
seconds
The camera is connected to the Quick Charge 5V power
adapter and is charging.
Fast blinking blue for 10
seconds
The camera synced to the base station.
Solid amber The camera is booting.
Blinking amber once per
minute
The battery charge is low (15% or less).
Fast blinking amber for 10
seconds
The camera failed to sync to the base station.
Blinking blue and amber A firmware update is in progress. DO NOT TURN OFF THE
CAMERA.
Firmware Updates
During initial setup, when you add the base station to your Arlo account, the Arlo
Pro 2 system checks for firmware updates. After you sync the first camera, if
firmware updates are available, a prompt is displayed for firmware updates on the
Devices page. Live stream will not be available until the device is updated.
After a base station firmware update, the base station reboots and connects to
the Internet.
When a camera firmware update is in progress, the LED on the camera blinks
alternating blue and amber. After this, the LED is o for one to two minutes while
the camera installs the firmware.
Important: Do not open the battery door while the camera is updating and
installing firmware. After the camera firmware update completes, the camera syncs
to the base station again and the camera LED blinks blue rapidly for 10 seconds.
Loading ...
Loading ...
Loading ...