1. Home
  2. Vintec
  3. Vintec VBS020SBA User Manual
  4. Page 7

User Manual - Page 7

For VBS020SBA.

Loading ...
Loading ...
Loading ...
OPERATION & WINE SERVING
Champagne NV, Sparkling, Spumante, 6℃
Dry White Semillon, Sauvignon Blanc, 8℃
Champagne Vintage, 10℃
Dry White Chardonnay, 10℃
Dry White Gewürztraminer, Riesling, Pinot grigio, 10℃
Sweet White Sauternes, Barsac, Montbazillac, Ice
Wine, Late Harvest , 10℃
Beaujolais, 13℃
Sweet White Vintage: Sauternes, 14℃
White Vintage Chardonnay , 14℃
Red Pinot Noir, 16℃
Red Grenache, Syrah , 16℃
Red Vintage Pinot Noir, 18℃
Cabernet & Merlot: French, Australian, New Zealand,
18℃
Chilean, Italian, Spanish, Californian, Argennean,
Vintage Bordeaux . 18℃
IMPORTANT INFORMATION ABOUT TEMPERATURE
Your VINTEC Wine Cellar and Beverage Centre has
been designed to guarantee opmum condions for
storing and/or serving your wines.
Fine wines require long and gentle developments and
need specific condions in which to reach their full
potenal.
All wines mature at the same temperature, which is a
constant temperature set between 12
℃ to 14℃. Only
the temperature of dégustaon (wine appreciaon)
varies according to the type of wines (see Wine Serving
7
User Manual
Factory preset chart
Model
VWS020SBA-X
VBS020SBA-X
6℃
Seng
Temperature
12℃
12℃(+/-2.5℃)
6℃(+/-2.5 ℃)
It is important to understand that there is a difference
between the air temperature inside the Wine Cellar
and Beverage Centre and the actual temperature of
the wine: You will need to wait approximately 12 hours
before nocing the effects of temperature
adjustment
due to the crical mass within a full Wine Cellar and
Beverage Centre.
Once the temperature is set, it is strongly advised not to
toy with it or adjust frequently. The thermostat will
maintain the temperature inside the Wine Cellar and
Beverage Centre within a +/- 2.5
℃ range.
But the thermal inera of the wine and the glass is such
that within this temperature range, the actual
temperature of the wine will only fluctuate 0.5
℃ to 1℃.
Control panel of VWS020SBA-X / VBS020SBA-X /models
To modify the pre-set temperature of single zone
models Adjust the desired cooling temperature by
pressing the UP or DOWN buons. Each depression
of the buons will scroll through the available
temperature sengs in increments or decrease of
1 degree Celsius.
The temperature seng can be adjusted from 6
℃ to
18
℃
(Beverage Centre : 2℃ to 10℃). To view the set
temperature, press and hold the UP or DOWN
buons, the set temperature will temporarily flash
in the LED display for 5 seconds.
Aer 5 seconds the temperature will return to display
the actual temperature.
Internal light
In order to reduce energy consumpon, this wine
cabinet will automacally switch off the LED lights
aer 10 minutes.
If you want the LED light to remain on connuously,
this is possible. Please press and hold the LIGHT
buon for 5 seconds, the display will show LP. Aer
4 seconds the display will revert back to normal and
the light will remain on unl manually switched off.
If you want to revert back and conserve energy
(recommended), please press and hold the LIGHT
buon for 5 second, the display will show LF,aer
4 seconds the display will revert back to normal, and
the light will automacally switch off aer 10 minutes.
WINE SERVING TEMPERATURE CHART
All wines mature at the same temperature, which is a
constant temperature set between 12℃ to 14℃.
The below chart is an indicave temperature chart to
indicate the best temperature for drinking purposes.
TEMPERATURE SETTINGS
Important: The LCD displays by default the actual
internal air temperature.
The temperature sengs are pre-set at the factory as
follows. In the event of a power interrupon, all
previous temperature sengs are automacally
erased and it will revert to the preset temperature
sengs.
Loading ...
Loading ...
Loading ...