Loading ...
Loading ...
Loading ...
CLEANING AND MAINTENANCE - 73914779561/B
e
• If present, remove the temperature probe.
• Remove the rack/tray support frames.
• Close the door.
Pyrolytic function setting
1. After entering the special functions menu,
press the button until the
function is selected.
1. Press the button to confirm.
The display shows the Pyrolysis duration (factory
set to 2:30 hours).
2. Turn the temperature knob to set the
duration of the Pyrolytic cycle from a
minimum of 2:30 hours to maximum of 3:30
hours.
3. Press the button to confirm.
4. Two minutes after the Pyrolytic cycle starts,
the indicator light comes on to indicate
that the door is locked by a device that
prevents the door from being opened.
At the end, is displayed and flashes
and a buzzer sounds.
5. Turn the function knob to position 0 to exit
the function.
Programmed pyrolytic cycle
It is possible to program the Pyrolytic cycle start
time like all other cooking functions.
1. After selecting the Pyrolytic function, press
button.
The indicator light flashes on the display.
1. Turn the temperature knob to set the function
end time.
2. Press the button to confirm.
The appliance waits until the set start time to start
Recommended pyrolytic cycle duration:
• Light dirt: 2:30.
• Moderately dirty: 3:00.
• Heavy dirt: 3:30.
It is not possible to start the pyrolytic
cycle if the temperature probe (if
available) is plugged in.
It is not possible to select any function
once the door lock device has been
activated.
The door is locked until the temperature
inside the oven cavity returns to a safe
level.
During the Pyrolytic cycle the fans
produce a more intense level of noise
due to a greater rotation speed. This is
an absolutely normal operation,
intended to provide more effective heat
dispersal. At the end of the pyrolytic
cycle, the fans will continue to operate
for long enough to avoid overheating
the walls of adjacent units and the front
of the oven.
During the first Pyrolytic cycle,
unpleasant odours may occur due to
the normal evaporation of oily
manufacturing substances. This is an
absolutely normal phenomenon which
disappears after the first pyrolytic cycle.
If the pyrolytic cycle gives unsatisfactory
results at minimum duration, it is
recommended to set a longer time for
subsequent cleaning cycles.
Loading ...
Loading ...
Loading ...