Loading ...
Loading ...
Loading ...
3 Turn the ignition switch to ON or ACC.
If the vehicle’s air conditioner or heater is
turned on, turn it off. Noise from the fan in the
air conditioner or heater may prevent correct
Auto EQ.
4 Turn off the AV source.
= For details of the operations, refer to Dis-
playing the AV operation screen on page 70.
5 Set the video setting for the rear dis-
play to “Mirror AV”.
= For details of the operations, refer to Select-
ing the video for rear display on page 168.
6 Display the “AV System Settings”
screen.
= For details, refer to Displaying the screen for
AV system settings on page 170.
7 Touch [Auto EQ Meas.].
The “Auto EQ Measurement” screen ap-
pears.
8 Plug the microphone into the mini-jack
connector.
USB and mini-jack connector
Microphone for acoustical measurement (sold separately)
9 Touch [Start].
A 10-second countdown starts.
10 Exit the vehicle and keep the door
closed until the countdown finishes.
When the countdown is over, a measurement
tone (noise) is emitted from the speakers and
the Auto EQ measurement begins.
11 Wait until the measurement is com-
pleted.
When Auto EQ is completed, a message is dis-
played indicating that the measurement is
completed.
p If the vehicle’s acoustics cannot be mea-
sured correctly, an error message will be
displayed.
p The measurement time varies depending
on the type of vehicle.
p To stop the measurement, touch [Stop].
12 Touch [OK].
13 Store the microphone carefully in the
glove compartment or another safe place.
If the microphone is subjected to direct sun-
light for an extended period of time, high tem-
peratures may cause distortion, color change
or malfunction.
Using sonic center control
Sound that is suited for the listening position
can easily be created with this function.
1 Display the “AV Sound Settings”
screen.
= For details, refer to Displaying the screen for
AV sound settings on page 174.
2 Touch [Sonic Center Control].
3 Touch [c]or[d] to select a listening po-
sition.
p The larger the value of the range: “Left7” to
“Right7” setting, the greater the delay of
the speaker output.
En
179
Chapter
32
Customizing preferences
Customizing preferences
Loading ...
Loading ...
Loading ...