Loading ...
V-ZUG Ltd
V-ZUG Ltd, Industriestrasse 66, CH-6301 Zug
[email protected], www.vzug.com
Planning aid
International collection
Kitchen appliances
J001059-R20
24.05.17
8
1.4
Positions of electrical connections
For EURO kitchens, allowance from the floor can vary. In this case, the electrical connection should be calculated using the dimen-
sion from the bottom edge of the appliance.
Oven above an oven
With this combination, an electrical connection should be provided for each appliance. Depending on the installation height and the
type of combination, the connections may be located at different heights.
Wall hoods with telescopic casing
The electrical connection must pass between the exhaust air piping and the lagging sheets. The measurements given in the table en-
sure that this condition is met.
M3
7
M1
M2
6
1
3
4
5
2
8
1 Wide switch box / control box / autarchic hob
2 Refrigerator in base unit / dishwasher
3 Oven/coffee-center
4 Combinations (oven / steam cooker / microwave)
5 Refrigerator, winecooler in tall unit
6 Microwave in a wall unit
7 Range hood
8 Warming drawer
M1 Distance from centre to dishwasher/refrigerator connection in base unit
M2 Distance from centre to coffee-center connection
M3 Distance from centre to range hood connection
Provide additional clearance for electrical connections if the installation niche has only the minimum depth.
Loading ...
Loading ...
Loading ...