Loading ...
Loading ...
Loading ...
FS1.5 Elliptical
7
1. Locate the Left Swing Arm (Upper) (7) and slide it through the Swing Arm Bushing (23); secure
it to the Lower swing arm (5) with two Button Head Socket Bolts (56) and two Nyloc Nuts (55).
Tighten using M5 Allen Wrench (68).
2. Slide the Handle Bar Cover (78) and Lower swing arm (5) over the Swing Arm Axle (22). Attach
with one Button Head Socket Bolt (150), one Split Washer (46) and one Flat Washer (100).
Tighten using the M5 Allen Wrenches (68).
Note: It is important to have a wrench (68) in the bolt (43) on both sides.
Note: If there is a gap after assembling the swing arm, please install a C-ring at Location A as
shown above.
3. Install the outer covers (79) with four Sheet Metal Screws (52). Tighten using the Phillips Head
Screw Driver (68).
#46. 5/16” Split
Washer (1pc)
#150. 5/16” x 3/4”
Button Head Socket
Bolt (1 pc)
#52. 5 x 12mm
Sheet Metal Screw
(4 pcs)
#55. 5/16”
Nyloc Nut (2 pcs)
#56. 5/16” x 1-3/4”
Button Head Socket
Bolt (2 pcs)
#100. 8.5 x 23 x 1.5T
Flat Washer (1 pc)
Left Swing Arm
3
Hardware Step 3
Loading ...
Loading ...
Loading ...