Loading ...
Loading ...
Loading ...
34
English
Other Functions
Setting the clock
1 In Standby mode, press and hold CLOCK/RDS
on the remote control until the time flashes on
the display.
➜ ”CLOCK SET” is displayed briefly. Then, the
hour digits flash on the display screen.
2 Tur n VOLUME -/+ clockwise or anticlockwise
or press VOLUME +/- on the remote control
to set the hours.
3 Press CLOCK/RDS to confirm.
➜ The minute digits flash on the display screen.
4 Tur n VOLUME -/+ clockwise or anticlockwise
or press VOLUME +/- on the remote control
to set the minutes.
5 Press CLOCK/RDS again to confirm the clock
setting.
Notes:
– This system only supports the 24-hour mode.
– The clock settings will be erased when the
system is disconnected from the power supply.
– The system will exit clock setting mode when
no button is pressed within 30 seconds.
Setting sleep/wake-up timer
Sleep timer setting
In power-on mode, the sleep timer setting
enables the system to automatically switch to
standby mode at a preset time.
1 In power-on mode, press SLEEP/TIMER on
the remote control repeatedly to select a preset
time.
➜ The selections are as follows (time in
minutes):
00 ➜ 10 ➜ 20 ➜ 30 ➜ 40 ➜ 50 ➜ 60 ➜ 70
➜ 80 ➜ 90 ➜ 00
2 When you reach the desired length of time,
release SLEEP/TIMER.
➜ ”SLEEP” appears.
To deactivate the sleep timer
● Press SLEEP/TIMER repeatedly until “00” is
displayed, or press ECO POWER/
STANDBY-ON B (or B on the remote
control).
In standby mode, the timer setting enables
the system to switch on automatically at a preset
time.
Wake-up timer setting
IMPORTANT!
– Before setting the timer, ensure that
the clock is set correctly.
1 Press and hold SLEEP/TIMER until the time
flashes on the display.
➜ ”TIME SET” scrolls. Then, the hour digits
flash on the display screen.
2 Tu r n VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote control
to set the hours.
3 Press SLEEP/TIMER to confirm.
➜ The minute digits flash on the display screen.
4 Tu r n VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote control
to set the minutes.
5 Press SLEEP/TIMER to confirm the time
setting.
➜ ”OFF” flashes on the display screen.
6 Tu rn VOLUME -/+ clockwise or anticlockwise
or press VOLUME -/+ on the remote control
to select “ON”.
➜ icon appears on the display screen.
To deactivate the timer
● Select “OFF” at Step 6.
pg 001-039_MCD708_-22 2006.10.31, 15:4634
Loading ...
Loading ...
Loading ...