Loading ...
Loading ...
Loading ...
22
OPERATION
Using the Cooktop
Cooktop Modules
The size and location of gas burners vary depending
on the rangetop model.
The large burners are the primary burners for most
cooking. The small burners are used for delicate
foods such as sauces or foods that require low heat
for a long cooking time.
Depending on your model, some or all of the small
burners are equipped with the Extra Low Simmer
function, which controls heat by turning the flame on
and off at preset intervals. The Extra Low Simmer
function is available on the small burners marked with
an asterisk below.
Cooktop Layouts
*Small
(15K)
Large
(23K)
Large
(23K)
*Small
(10K)
Small
(15K)
Small
(15K)
* Extra Low Simmer
Cooktop Timers
Each cooktop control knob has an LED display at the
top which provides information such as heat level,
or time remaining. The gas control knobs include a
timer function. The red LED numbers display heat
levels and the blue LED numbers display the timer
countdown.
Setting the Cooktop Timers
A cooktop timer can only be set when the element is
in use. After the timer ends, a chime sounds until the
element is turned OFF.
1
Push in and turn the knob to turn on the element.
2
Set a timer by turning the LED ring behind the
knob. Turn the LED ring right or left and hold it to
increase or decrease the time.
3
Release the LED ring when the desired time
appears in the knob display.
4
The knob display shows the time counting down.
A chime sounds when the time ends.
5
To cancel a timer, turn the LED ring to the left
until 1 appears in the display. Then, turn the LED
ring to the left again.
Cooktop Time Range
Gas Cooktop 1 min. – 12 hr.
Loading ...
Loading ...
Loading ...