Loading ...
Loading ...
Loading ...
15
INSTALLATION
ENGLISH
Gas Supply
The rangetop is designed to operate at a pressure
of 5" of water column on natural gas or 10" of water
column on LP.
Make sure that you are supplying the rangetop with
the type of gas for which it is configured.
This rangetop is convertible for use with natural
or LP gas. When using this rangetop with LP gas,
conversion must be made by a qualified LP installer
before attempting to operate the rangetop.
For proper operation, the pressure of natural gas
supplied to the regulator must be between 6" and
10.5" of water column.
For LP gas, the pressure supplied to the regulator
must be between 11" and 13" of water column. When
checking for correct operation of the regulator, the
inlet pressure must be at least 1" more than the
operating (manifold) pressure as given above.
The pressure regulator located at the inlet of the
rangetop must remain in the supply line regardless of
which type of gas is being used.
A flexible metal appliance connector used to connect
the rangetop to the gas supply line should have
an I.D. of
5
/
8
" and a maximum length of 5 feet. In
Canada, flexible connectors must be single wall metal
connectors less than 6 feet in length.
Installing the Rangetop
Unpacking the Rangetop
CAUTION
•
Excessive Weight Hazard: You should use
2 or more people to move and install the
appliance. Failure to do so can result in back
or other injury.
1
Cut the packing straps. Lift the carton straight
up. Remove packing material, tape and any
temporary labels from the appliance before
using. Leave the adhesive-backed foam layer
over the brushed-metal surface, to protect
the finish from scratches. Do not remove any
warning-type labels, the model and serial number
label, or the Tech Sheet that is located on the
back of the rangetop.
2
The grates, burner heads, burner caps, and
trays must be removed to facilitate handling.
Loading ...
Loading ...
Loading ...