Loading ...
Loading ...
Loading ...
6
WALL MOUNTING
Before drilling any holes, it is the installers responsibility to ensure that there are no
pipes or cables which may be damaged during installation. The unit should not be
plugged in until installation is complete.
Unscrew the two screws holding the wall mounting bracket
to the back of the body.
Place the wall bracket in position on the wall, using a
spirit level to ensure it is straight.
Mark the position of the mounting holes using a
Pencil.
Drill the holes at the marked position using a suitable
drill bit
Insert the wall plugs into the holes before fixing the bracket
to the wall using the supplied screws.
Ensure that the bracket is secure.
Fit the heater into the wall bracket, ensuring it is correctly positioned
and the screw holes line up.
Tighten the two screws on the top of the bracket, ensuring the
unit is secure, before connecting the power.
Loading ...
Loading ...
Loading ...