DCS-5030L User Manual

Loading ...

33D-Link DCS-5030L User Manual 33

Section 3 - Conguration

Extender Setup

Check this box to enable Extender Mode.

This shows the name of the Host wireless network that the

camera is connected to and will extend.

Select an option:

• Same as Host Wireless Network Name: Your extended

network will use the same name and settings as your

Host network. Your devices can use the same wireless

information to connect to both the Host and Extended

networks.

• Create a New Wireless Network Name: This allows

you to manually set the name and security used for the

extended network. You will need to add this information

for each wireless device that connects to this Extended

network.

Set the maximum number of clients that are allowed to connect

to the extended network.

If you choose to Create a New Wireless Network Name, you

can set your wireless security options here.

• None - No wireless encryption will be enabled. All data

sent over the wireless connection could be viewed by

third parties.

• WEP - WEP is the simplest form of wireless encryption,

and should only be used if you devices do not support

WPA/WPA2 encryption.

• WPA/WPA2 - This is currently the most advanced

Enable

Extender

Mode:

Host Wireless

Network

Name:

Extended

Wireless

Network

Name (SSID):

Maximum

Clients

Allowed to

Connect:

Security

Mode:

This section allows you to setup and congure the Extender Mode feature of your camera. Extender Mode allows your camera

to extend the range of your existing wireless network by repeating the signal it receives. You can choose to use the same

network name and settings as your existing wireless network, or you can create a new one.

Loading ...

DCS-5030L D-Link Cameras

User Manual - Page 33