Loading ...
Loading ...
Loading ...
5
Cleaning the Glass Cooktop
Burned-On Residue
Allow the cooktop to cool.
After scraping with the razor scraper, spread a few drops of CERAMA BRYTE
®
Ceramic Cooktop Cleaner on the entir
burned residue area. Use the CERAMA BRYTE
®
Cleaning Pad to remove any remaining residue.
Damage from Sugary Spills and Melted Plastic
Sugary spillovers (such as jellies, fudge, candy, syrups)
or melted plastics can cause pitting of the surface
your cooktop unless the spill is removed while still hot.
Wearing an oven mitt:
a. Use a single-edge razor blade scraper (CERAMA
BRYTE
®
Ceramic Cooktop Scraper) to move the spill
to a cool area on the cooktop.
Remove the spill with paper towels.
Precision Cooking Probe (some models)
WARNING
Follow proper instructions for sous vide cooking to avoid foodborne illness.
The precision cooking probe works with your range to accurately control the temperature of a water bath for sous
cooking and similar activities. See the full owner's manual www.GEAppliances.ca for details and usage instructions.
Using the Warming Zone and Warming Drawer
(some models)
WARNING
FOOD POISON HAZARD: Bacteria may grow in food at temperatures below 140°F.
Always start with hot food. Do not use warm setting to heat cold food.
Do not use warm setting for more than 2 hours.
Failure to follow these instructions may result in foodborne illness.
The warming zone is located at the back center of
cooktop.
Turn the warming zone on to a HI, MED, or LOW setting.
A surface on indicator light will illuminate when any
unit is turned on.
For more details regarding the warming zone and
drawer, please see full owner's manual at
www.GEAppliances.ca.
Surface Units - Knob-Free Models
NOTE: All protective packing must be removed from all parts. It cannot be removed if it is baked on.
Radiant Glass Cooktop
The surface unit will cycle on and off to maintain your
selected control setting. This is
For glass cooktop surfaces:
A HOT COOKTOP indicator light will:
150°F.
To Turn On a Surface Unit:
1. Touch
On/Off pad, then touch + - pad.
+ - pad to choose the desired
setting.
3. For the dual and triple
units, touch Burner Size
pad to select the
burner size.
To Turn Off a Surface Unit:
Touch
On/Off pad.
Dual and Triple Surface Units (on some models)
The surface unit has 2 or 3 cooking sizes to select
so you can match the size of the unit to the size of
cookware you are using.
Loading ...
Loading ...
Loading ...