2017 JEEP COMPASS (NEXT GEN) User Manual

Loading ...

To Deactivate

A soft tap on the brake pedal, pushing the CANC button or

normal brake pressure while slowing the vehicle will

deactivate the Speed Control without erasing the set speed

from memory.

Pushing the on/off button or turning the ignition to the

OFF position erases the set speed from memory.

To Resume Speed

To resume a previously set speed, push the RES (+) button

and release. Resume can be used at any speed above

20 mph (32 km/h).

To Vary The Speed Setting

To Increase Speed

When the Speed Control is set, you can increase speed by

pushing the RES (+) button.

The driver’s preferred units can be selected through the

instrument panel settings if equipped. Refer to “Getting To

Know Your Instrument Panel” for more information. The

speed increment shown is dependent on the chosen speed

unit of U.S. (mph) or Metric (km/h):

U.S. Speed (mph)

• Pushing the RES (+) button once will result in a 1 mph

increase in set speed. Each subsequent tap of the button

results in an increase of 1 mph.

• If the button is continually pushed, the set speed will

continue to increase until the button is released, then the

new set speed will be established.

Metric Speed (km/h)

• Pushing the RES (+) button once will result in a 1 km/h

increase in set speed. Each subsequent tap of the button

results in an increase of 1 km/h.

• If the button is continually pushed, the set speed will

continue to increase until the button is released, then the

new set speed will be established.

To Decrease Speed

When the Speed Control is set, you can decrease speed by

pushing the SET (-) button.