Schwinn IC2 Indoor Cycling Bike

User Manual - Page 21

For IC2 INDOOR CYCLING BIKE.

PDF File Manual, 24 pages, Read Online | Download pdf file

IC2 INDOOR CYCLING BIKE photo
Loading ...
Loading ...
Loading ...
21
Read all maintenance instructions fully before you start any repair work. In some conditions, an assistant is necessary to
do the necessary tasks.
Equipment must be regularly examined for damage and repairs. The owner is responsible to make sure that
regular maintenance is done. Worn, damaged or loose components must be repaired or replaced immedi-
ately. Only manufacturer supplied components can be used to maintain and repair the equipment.
If at any time the Warning labels become loose, unreadable or dislodged, contact your local distributor for
replacement labels.
Daily: Beforeeachuse,examinetheexercisemachineforloose,broken,damaged,orwornparts.
Donotuseiffoundinthiscondition.Repairorreplaceallpartsattherstsignofwearor
damage. After each workout, use a damp cloth to wipe your machine and Console free of
sweat.
Note:AvoidexcessivemoistureontheConsole.
Weekly: Clean the machine to remove any dust, dirt, or grime from the surfaces. Check for smooth
seat and handlebar operation. If needed, sparingly apply a thin coating of silicone lube to
ease operation.
Silicone lubricant is not intended for human consumption. Keep out of reach of
children. Store in a safe place.
Note: Do not use petroleum based products.
Monthly
or after 20 hours:
Check pedals and crank arms and tighten as necessary. Make sure all bolts and screws are
tight. Tighten as necessary. Lubricate chain with bike chain oil.
NOTICE: Do not clean with a petroleum based solvent or an automotive cleaner. Be sure to keep the Console
free of moisture.
MAINTENANCE
Chain Lubrication
Remove the chain guard door and apply a few drops of bike chain oil to the chain.
Do not apply oil when the chain is moving.
Note: Use caution to avoid staining clothes or carpet.
Replacing the Console Batteries
TheConsoledisplaywillshow“Batt”duringpowerupifthebatterylevelis
low.Whenreplacingthebatteries,makesurethebatteriespointinthe+/–
direction shown in the battery bay.
Note:TheconsoleusesAAsizebatteries(LR6).
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-
Cd, Ni-MH, etc) batteries.
Be sure to remove the batteries to prevent corrosion damage if you are not
goingtousethemachineforanextendedperiodoftime.
+
-
X2
Loading ...
Loading ...
Loading ...