Loading ...
Loading ...
Loading ...
40
www.GEAppliances.ca
PROBLEM Possible Causes What To Do
Clothes shrink Some fabrics will naturally shrink • To avoid shrinkage, follow garment care labels exactly.
when washed. Others can be
safely washed, but will shrink
• Some items may be pressed back into shape after drying.
in the dryer
• If you are concerned about shrinkage in a particular
.ti yrd elbmut ro hsaw enihcam ton od ,meti
Greasy spots on clothes Improper use of fabric softener • Follow directions on fabric softener package.
Drying dirty items • Use your dryer to dry only clean items. Dirty items can
with clean ones stain clean items and the dryer.
Clothes were not • Sometimes stains which cannot be seen when the
completely clean clothes are wet appear after drying. Use proper washing
.gniyrd erofeb serudecorp
Lint on clothes Lint filter is full • Clean lint screen before each load.
Improper sorting • Sort lint producers (like chenille) from lint collectors
.)yorudroc ekil(
Static electricity can attract lint • See suggestions in this section under STATIC.
Overloading • Separate large loads into smaller ones.
Paper, tissue, etc., left in pockets • Empty all pockets before laundering clothes.
Static occurs No fabric softener was used • Try a fabric softener.
ecnuoB •
®
Fabric Conditioner Dryer Sheets have been
ni desu nehw sreyrD EG lla ni esu rof devorppa
.snoitcurtsni s’rerutcafunam eht htiw ecnadrocca
Overdrying • Try a fabric softener.
ot gnittes tsujdA • Less Dry or Damp.
Synthetics, permanent press • Try a fabric softener.
and blends can cause static
Collars and waistbands The dryness monitor senses • Choose Speed Dry or Time Dry to dry damp collars
still wet at end of cycle that the body of the clothes and waistbands. In the future, when drying a load with
is dry esoohc ,sdnabtsiaw dna sralloc More Dry.
Slight variation This is normal • Due to the metallic properties of paint used for this unique
in metallic color ot eud rucco yam roloc fo snoitairav thgils ,tcudorp
.snoitidnoc gnithgil dna selgna gniweiv
Door
is too foggy to see Steam condenses on inner door • This is normal.
clothes during a steam
cycle
Water seen on inside of Steam condenses on these • This is normal.
door and top of lint filter surfaces
when opening door after
steam cycle
Small areas on clothes are Steam condenses on inner drum • If using the Steam DeWrinkle cycle, manually reduce the
damp after steam cycle .emit elcyc
Loading ...
Loading ...
Loading ...