Loading ...
Loading ...
Loading ...
37
Stacking.
4. Prepare the Washer and
Dryer
A. Place the washer in the approximate
location.
B. Make sure the washer is level.
Refer to washer Installation
Instructions for details.
C. Reverse dryer door swing if desired.
See dryer Installation Instructions
for details.
NOTE: The washer door swing is not
reversible.
INSTALLING THE STACK BRACKET KIT (cont.)
5. Install Dryer and Bracket on
Washer
A. Lift the dryer on top of the washer.
Be careful not to scratch the top
of the washer with the brackets.
Protect the washer control panel
with cardboard or other protection.
Be sure to lift the dryer high enough
to clear the washer control panel.
WARNING!
Potential Personal Injury. More than
two people are recommended to lift
the dryer into position because of its
weight and size. Failure to do so could
result in personal injury or death.
B. htiw tekcarb eht ni seloh eht ngilA
the holes in the back of the washer.
Using a Phillips screwdriver, attach
the 2 #8 x 1/2” tapping screws.
Repeat on both sides of the washer.
6. Finalize the Installation
A. Refer to the washer Installation
Instructions to complete the washer
installation.
B. noitallatsnI reyrd eht ot refeR
Instructions to complete the dryer
installation.
C. dekcats eht klaw ro edils ylluferaC
washer and dryer into place. Use felt
pads or other sliding device to assist
moving and to protect flooring.
WARNING!
Potential Personal Injury. Do not push
on the dryer once installed to top of
the washer. Pushing on the dryer may
result in pinched fingers.
Place
hands
here
Place
hands
here
Loading ...
Loading ...
Loading ...