Loading ...
Loading ...
Loading ...
6
MODEL: RJ11-17-GP MODEL: RJ11-17-GP
Operating Instructions (cont'd)
NOTE: We reccommend increasing the amount of tea leaves or tea bags used to
allow for a more robust iced tea.
3. Allow tea to steep for the reccommended amount of time according to the type of
tea you desire (see chart on page 10).
4. Turn unit OFF by pressing the ON/OFF button. Allow unit to cool for a minimum of
10 minutes and very carefully remove the tea infuser.
WARNING: Tea infuser will be hot. Be careful of hot steam.
5. Add ice and/or cold water up to the MAX fill line of the glass and close the kettle lid
for serving. Transfer tea to a serving pitcher to store in refrigerator.
HEATING WATER WITHOUT STEEPING TEA
1. Remove tea infuser and add water to the kettle max fill for water is 1.7 Liters.
2. Securely close lid and press ON/OFF button to begin heating water. Red indicator
light will turn on and water will begin to heat. NOTE: If no temperature is selected
kettle will be automatically set to max heat (212º F).
3. When water reaches a full boil (212º F) unit will beep 1 time and the LCD display will
show "OFF". NOTE: Keep Warm feature only activates when a specific programmed
temperature has been set.
MEMORY FEATURE
The unit features an internal memory that lets you remove the kettle from the
base for up to 5 minutes without the unit shutting off. Instead, heating or Keep Warm
will be paused. LCD will display "ER" while the kettle is off the base. When the kettle is
returned to the base the cycle will resume from where it left off.
BOIL-DRY PROTECTION
Your unit is equipped with boil-dry protection. If it is heating without enough
water in the unit, the heater will automatically shut off to avoid damaging
the element. The unit will beep 3 times and the LCD display will show "OFF".
Once the kettle has cooled down, lift it off the base, then replace it to reset.
The quickest way to cool the unit down is to fill the kettle with cold water.
Loading ...
Loading ...
Loading ...