Loading ...
Loading ...
Loading ...
17
9 Frequently asked questions
The power LED on the
receiver is not lit up in
red in standby mode.
Make sure that there is power supply for the receiver.
The laptop screen
image is not
full screen on my TV.
1 Right-click on an open space on your desktop.
2 Select Graphics Options > Output to > Digital Television (Now the
laptop image will only appear on your TV).
3 Once again, right-click on an open space on your desktop.
4 Select Screen Resolution.
5 On the pop-up box increase the resolution settings till the laptop
image better ts your TV screen.
6 Select OK and KEEP CHANGES when you are satised with your
image size.
There is no video
displayed on my TV
screen.
• Make sure that the appropriate cables are selected and inserted to the
transmitter, receiver, and HDTV.
• Make sure that you select HDMI as the input source on your HDTV.
• Check the power LED and status LED on the receiver:
• Flashing blue power LED: Make sure that the transmission range
between receiver and transmitter is not over 23 feet (7 meters)
transmission distance. Move the transmitter closer to the receiver.
• Solid blue power LED + slow and ashing source LED: 1)
Make sure that the frame rate and video resolution of your
A/V equipment are supported and conformed to the technical
specication (see the chapter ‘Technical data’). 2) Connect
the computer to your TV with an HDMI cable to check the
compatibility of the video format.
• Solid blue power LED + quick and ashing source LED: 1) Make
sure that the proper cables are connected between the receiver
and HDTV. 2) Make sure that your computer connected to the
transmitter is powered on. 3) Make sure that the HDMI cable is
connected between the HDTV and receiver. 4) Make sure that the
display setting of your computer is set to clone display or extended
display.
Tip
•
For information about how to set your computer to clone or extended display, see
‘How can I connect to my computer to enable the external display?’ described later in
this chapter.
EN
English
Loading ...
Loading ...
Loading ...