Loading ...
Loading ...
Loading ...
6
3. “UV-C /ION” BUTTON:
Press this button to turn on/off the UV lamp and I onizer function. The button can b e
cycled to turn both on and off and to turn on each function individually.
4. “TIMER” BUTTON:
1) By pressing this button, the purifier can be timed to operate for intervals of 2, 4,
and 8 hours, stopping automatically when the time has elapsed.
2) Press this button (Timer) to select the desired operating time.
3) To select the continuous operating mo de, press the button unti
l there
are no mor e indicator lights on.
Important note: When the unit is not in use, switch it off, and unplug it.
INSTALLING & REMOVING FILTERS
FILTER REPLACE INDICATOR
The power LED light flickering continuously indicates that it is time to replace the
filter. Replace the filter according to the directions then press the ON/OFF(Filter reset)
button and hold for 5 seconds to r estart the system. The light will stop flickering.
*The 3 in 1 HEPA filter will last approximately 3
-6 months depending on usage and
air quality.
1. Open the front cover from the top .
2. Remove the filter by pulling the two pull tabs.
3. Insert new filter into the unit. The pull tabs on the filter should be facing up and
towards you for corre ct installation.
4. Reattach the front cover of the unit and securely latch into place.
5. Press and hold FILTER RESET Button for 5 seconds to reset filter change indicator.
Loading ...
Loading ...
Loading ...