Loading ...
Loading ...
Loading ...
20
Bi-amp connections
To congure a bi-amp stereo system, you need two
M-5000 units.
The M-5000 features two built-in ampliers. Each of
these amps is connected to the mid/high-frequency
speaker driver (tweeter) and the low-frequency driver
(woofer) on the speaker of the corresponding channel.
You need to use speakers that feature two sets of
terminals (total of four) that allow each speaker to be split
into two sections (low-frequency and mid/high-frequency
ranges). Bi-amping speakers can prevent the back ush of
EMF (electromotive force) generated by the woofer from
affecting the signal, resulting in improved sound quality
in some cases.
Connect the input source to the L-channel input jacks on
both M-5000 units.
1
Turn o the power to the unit and all
connected components.
2
Remove the shorting bars or bridges on
the speakers.
The LPF (low pass lter) and HPF (high pass
lter) crossovers will be separated.
B
B
B
B
SPEAKERS
OFF
A
B
A
+
B
WIRING
BI
High
Low
High
Low
M-5000
M-5000
MODE: DUAL MONO/BRIDGE
SPEAKERS
OFF
A
B
A
+
B
WIRING
BI
MODE: DUAL MONO/BRIDGE
MODE selector
Remove the shorting bar.
PreamplierR channel
R channel L channel
R channel signal L channel signal
R channel
SPEAKERS selector
(front panel)
Loading ...
Loading ...
Loading ...