Loading ...
Loading ...
Loading ...
29
Individual measured values
W
hen the relevant memory button (M1 or
M2) is pressed again, the last individual
measurement is displayed (in this example,
measurement 03).
W
hen the relevant memory button (M1 or M2) is pressed
again, you can view your individual measurements.
•
To switch the device off again, press the START/STOP
button .
You can exit the menu at any time by pressing the
START/STOP button .
Delete the measured values
•
To clear the memory of the relevant user memory, you
must first select a user memory.
•
Start the retrieval of the average measured values.
A flashes on the display and the average value of all
saved measured values in this user memory is dis-
played.
•
Then press and hold the M1 and M2 memory buttons
for 5seconds.
All the values in the current user memory are
deleted.
Deleting individual measurements
T
o clear individual measurements from the relevant user
memory, you must first select a user memory.
•
Start the retrieval of the individual measured values.
•
Press and hold the memory buttons M1 and M2 for
5seconds.
•
The selected value is deleted. The device briefly dis-
plays CL 00.
•
If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP button.
Transfer via Bluetooth
®
low energy technology
It is also possible to transfer the measured values saved on
the device to your smartphone using Bluetooth
®
low energy
technology.
You will need the “beurer HealthManager” app for this. The
app is available from the App Store.
Proceed as follows to transfer values:
If Bluetooth
®
is activated in the settings menu, the data is
transferred automatically after the measurement. The symbol
appears in the top left of the display (see chapter 4 “Preparing
the measurement”).
Loading ...
Loading ...
Loading ...