Loading ...
Loading ...
Loading ...
u
Total height of the cupboard (i.e. 70-3/8 in. (1788 mm))
plus thickness of the cover and floor plate (normally
3/4 in. (19 mm)) minus the height of the freezer cabinet
door leaf (xxx in. (xxx mm)) as calculated above and
minus the gap width (approximately 1/8 in. (3 mm)):
70-3/8 in. + 3/4 in. + 3/4 in. - xxx in. - 1/8 in. = 71-3/4 in.
- xxx in. (1788 mm + 19 mm + 19 mm - xxx mm - 3 mm
= 1823 mm - xxx mm)
7 Air circulation in the kitchen
cabinet
Fig. 4
Fig. 5
-
There must be an effective ventilation gap of at least
31 in
2
(200 cm
2
) per appliance for the air inlet
Fig. 5 (A)
and the air outlet
Fig. 5 (B)
.
-
Basically, the bigger the ventilation gap, the more
energy-saving the operation of the appliance.
Fig. 6
-
The top ventilation gap can be set up either directly
above the appliance with an optional ventilation grid
Fig. 6 (C)
near the ceiling, above the cabinet
Fig. 6 (D)
or
as an air vent in a false ceiling
Fig. 6 (E)
.
Ventilation from underneath through the floor of the
kitchen cabinet can be set up with the supplied ventilation
grid
Fig. 7 (3)
or an air vent with at least a 31 in
2
(200 cm
2
)
cross section area. If you use the supplied ventilation grid
Fig. 7 (1)
please proceed as follows:
Air circulation in the kitchen cabinet
* Depending on model and options 7
Loading ...
Loading ...
Loading ...