Loading ...
Loading ...
Loading ...
u
Align the cabinets with a spirit level and a try square. If
necessary level them by putting something underneath
them.
u
Ensure that the floor and the side panels of the cabinet
are at right angles to each other.
6 Cabinet door
-
Two doors are required for the kitchen cabinet: a top
one for the fridge section and a bottom one for the
freezer section.
-
The doors must be at least 5/8 in. (16 mm) and no more
than 3/4 in. (19 mm) thick.
-
When the two doors are closed the gap between the
top and bottom door must be at least 1/8 in. (3 mm).
-
The gap between the cabinet doors must be the same
as the gap between the appliance doors.
-
There must be a gap of at least 1/8 in. (3 mm) between
the door and the cupboard door above it (if there is
one).
-
The width of the cabinet doors depends upon the style
of the kitchen and the size of the gap between the door
panels of the cupboard. Normally a vertical gap of
1/8 in. (3 mm) should be left between the cabinet
doors.
-
The upper edges of the top door and the bottom door
should be the same as the on the cupboard(s) next to it
if there are any other cupboards.
-
The unit doors must be assembled flat and free from
tension.
NOTICE
An excessively heavy unit door can cause potential
damage!
If the unit door is too heavy, we cannot rule out damage to
the hinges, which may compromise the use of the unit.
u
Before installing the unit door, ensure the door does not
exceed the permissible weight.
Appliance type Maximum weight of unit
door
Fridge
compart-
ment door
Freezer
compart-
ment door
HC 1021, HC 1030, HC
1050B, HC 1070, HC
1080
37 lbs (17 kg) 26.5 lbs (12
kg)
HCB 1060 39.7 lbs (18
kg)
26.5 lbs (12
kg)
Cabinet door
* Depending on model and options 5
Loading ...
Loading ...
Loading ...