Loading ...
Loading ...
Loading ...
Singtrix support resources (FAQs, guides, videos, tips & trix) at http://www.singtrix.com. Contact us at [email protected] (9-5PM EST)
Studio
(Effects Console)
Studio AC
Adapter
3.5mm Music
Audio Cable
Speaker
(2.1 Stereo Home Theater System)
Speaker AC
Brick Adapter
Speaker Cable
(w/ Left & Right RCA
plugs)
HIT Button
Step Symptom / Cause Check / Troubleshooting Solution
No Audio from both Mic & Music Device
1 Studio or Speaker not powered on
Check that you have turned on power to both the
Studio and Speaker
Power all components
2
Cables plugged incorrectly or not fully
inserted
Check all connections Make proper connections
3 Speaker cable not functioning
Confirm that Speaker and Studio are working: 1)
Check Speaker light is on. With volume turned up 75%
on Speaker disconnect the left or right RCA plug on the
back of the Speaker and re-insert and listen for any
static.
2) Plug headphones directly into Studio speaker
output.
Check both Studio speaker outputs 1 and 2
Replace Speaker cable if the following is confirmed:
1) Speaker works - when powered, unplugging and re-inserting the
RCA plugs at the back of the Speaker causes a contact or static
noise, and…
2) The Studio speaker outputs work with headphones.
4 Speaker not functioning
Check for lights on the Speaker and Speaker AC
Adapter. With volume turned up 75% on Speaker
disconnect the left or right RCA plug on the back of the
Speaker and re-insert and listen for any static.
If no power or noise when unplugging and re-inserting the RCA
plugs, Speaker needs to be replaced or repaired.
5
Speaker AC Brick Adapter not
functioning
If Speaker is not working, check for lights on Speaker
AC Brick Adapter
If no power, Speaker AC Brick Adapter or Adapter plug connector
needs to be replaced. If you have a compatible plug from another
device, try with the AC Brick Adapter.
6 Studio speaker output not functioning
Plug Music Device directly into the Speaker using the
Speaker cable.
If sound is heard with device plugged directly into the Speaker,
Studio needs to be replaced or repaired.
If no sound, follow the troubleshooting steps above to confirm both
Speaker and Speaker Cable are working properly.
7
Speaker turns off on its own (power
indicator light is off) after a period of time
when system is not in use.
Turn Speaker power off for 5 seconds and then back
on. An environmentally friendly energy saving feature
may be active on your Speaker. Turning power off and
on resets the power saving mode on some units.
Reset power or raise your music device volume (smart device or
computer etc) to around 85%-90%. The Speaker will detect the
increase signal volume level and turn back on.
Loading ...
Loading ...