Loading ...
Loading ...
Loading ...
Assembly Instructions
A. Place the Front Post Ring (37) around the Front Post (6).
B. Connect the Main Wire A and B.
C. Fix the Front Post (6) to the Main Frame (1) and tighten with 4 x M8x15MM Allen bolts (23), 4 x
8MM Spring Washers (22), 2 x 8MM Washers (21) and 2 x 8MM Arc Washers (24).
D. Attach the Front Post Cover (33L/R) to the Main Frame (1) and the Front Post Ring (37) with 3 x
ST4.2 x 15mm Phillips Screws (25).
E. Remove the M5x50mm Philips Bolt and Washer (78) from the Tension Knob (68).
Note: The M5x50mm Philips Bolt and Washer (78) is pre-assembled to the Tension Knob (68).
F. Turn the Tension Knob (68) to Level 1 and connect the bottom of the tension knob with the hook as
shown in the diagram. Then attach the Tension Knob (68) to the Front Post (6) using 1 x M5x50mm
Philips Bolt and Washer (78).
Step 2
8
Loading ...
Loading ...
Loading ...