Loading ...
Loading ...
Loading ...
Assembly Instructions
A. Attach the Handle (7) to the bracket on the Front Post (6), and secure with M10 Lock knob (10).
Note: To adjust the position of the handle, turn the lock knob (10) anti clockwise to loose the handle
(7) as shown in the diagram, and adjust the handle (7) to your required position, then secure the lock
knob (10).
B. Connect the two signal Wires(E) from Front Post (6) to the two Wires (F)from Handle (7).
C. Put the Left Handle Cover (15-L) and Right Handle Cover (15-R) on the left and right side of the
Handle (7) respectively, and then lock them to Front Post (6) using 4 x ST4.2x15mm Philips Screw
(25). Please note that the 4 × ST4.2 × 15mm Philips Screw (25) are pre-assembled.
D. Put two Joint Rings (74) on the left and right side of the Handle (7) respectively, then push them to the
Left and Right Handle Cover (15 L & R).
Step 4
10
74
15L
25
25
6
25
25
74
7
10
15R
E
E
F
F
Loading ...
Loading ...
Loading ...