Loading ...
Loading ...
Loading ...
USA
6
AFTER SALES SUPPORT
888-315-6553 [email protected]
MODEL: RJ43-SQ-9 / RJ43-SQ-6MODEL: RJ43-SQ-9 / RJ43-SQ-6
Operating Instructions
BEFORE FIRST USE
1. Place the dehydrator on a level, flat surface that is clean and dry.
2. Ensure that the dehydrator is several inches away from obstructions, such as walls,
cabinets, doors, and other appliances. Allow enough room above the dehydrator so
the door can be fully opened.
3. Wash the Drying Trays and Protective Food Sheet in warm, sudsy water. Dry
thoroughly.
4. Use a soft damp cloth to clean the exterior of the dehydrator and Door.
Dry with a paper towel or soft cloth.
5. Read safety instructions.
6. Press the ON/OFF Icon to start the dehydrator drying process. Dry the interior and
Drying Trays for 30 minutes before adding food. This helps dry the interior for initial
use. Smoke or odors are normal during the initial 30 minute drying time. Allow
sufficient ventilation.
7. Insert Drying Trays into the dehydrator and enjoy!
SETTING TIME AND TEMP SETTINGS TO START
1. Place prepared foods on the Drying Trays (see p. 17 for food preparation tips). Do
not overload the Drying Trays with food.
2. Food should be placed on Drying Trays in single layers ONLY, not touching or
overlapping in any way.
3. Plug the polarized plug into a compatible outlet. A BEEP sound indicates the
dehydrator is receiving power.
4. Slide the Door down until it is securely closed.
5. Press the ON/OFF Icon on the Control Panel. The drying process will begin right
away. The Automatic Fan will start first. The interior Heating Element will begin
automatically heating within 5 seconds.
6. The LED Display on the Control Panel will display the default drying time of
10 hours (10:00).
7. Press the TEMP Icon on the Control Panel. The LED Display will show the default
TEMP of 158°F. The LED Display will then automatically return to display the
drying time remaining.
Loading ...
Loading ...
Loading ...