Loading ...
Loading ...
Loading ...
11
English
►Trimming the edge of beard
Cut your beard gradually
with the power switch facing
opposite side of your skin,
taking care not to cut too
much.
Cleaning the shaver
1. Turn the shaver off and disconnect the AC adaptor.
2. Apply some hand soap and some water to the system outer
foil.
3. Turn the shaver on.
4. Turn off the shaver after 10 to 20
seconds.
5. Remove the outer foil section.
6. Clean the shaver, the outer foil
section, and the trimmer with running
water.
• Rinse with water and shake up and
down several times to remove the
water.
7. Wipe off any drops of water with a dry cloth.
8. Dry the outer foil section, the shaver,
and the trimmer completely.
9. Attach the outer foil section to the shaver.
Note
Be careful not to hit the main body on the sink or any other object
while draining the water. Failure to do so may cause malfunction.
Replacing the system outer foil and the inner blades
system outer foil once every year
inner blades once every two years
►Removing the outer foil section
Press the foil frame release buttons and lift the
outer foil section upwards.
►Attaching the outer foil section
Securely attach the outer foil section to the shaver
until it clicks.
ES-RT17_US.indb 11 2016/03/24 14:02:14
Loading ...
Loading ...
Loading ...