Loading ...
Loading ...
Loading ...
11
/ Clearence dimensions
HOB FASTENING
In order to prevent accidental water ingress into
the unit below, the appliance is fi tted with a special
gasket.
1) remove the grids, burners and burners caps
2) Turn the hob upside down over a soft surface.
3) Lay the sealing gasket out along the lower
edge of the built-in hob after cleaning the mating
surface.
4) Turn the hob upside down.
5) Place the hob into the worktop cut-out
6) To fasten the hob to the worktop, use a
screwdriver to install the four plates using the
corresponding screw in the bottom of the hob.
7) Install the protection carter ( see kit)
8) Position the burners, burners cup and the grids
Loading ...
Loading ...
Loading ...