Loading ...
Loading ...
Loading ...
Fuse Replacement
The fuse box is located under the dashboard on the driver's side.
The circuits protected by each fuse are listed inside the box.
The fuses for automatic shoulder belt buckle motor are installed on
the terminal of the battery.
If any of your car's lights, accessories, or controls don't work,
check their fuses. If a fuse has blown, the wire inside it will be
burned through.
Checking the fuses:
1. Turn off the ignition and all other switches.
2. If you find a blown or possibly faulty fuse, use the fuse remover,
stored beside the spare fuse to pull the blown fuse out of its clips.
3. Check all other fuses as well as the one you suspect.
4. Push in a new fuse of the same rating, and make sure it fits tightly
in the clips. If it fits loosely, have your dealer fix it.
If you don't have a spare, take a fuse of the same rating (or lower)
out of a circuit you may not need, like the radio or cigarette lighter.
Remember to replace the borrowed fuse and the missing spares.
CAUTION:
A blown fuse may be just a symptom of some other problem. If a
new fuse blows right away, the cause should be diagnosed and
corrected by a qualified Honda technician. Never replace a fuse
with anything but another fuse of the same or lower rating. A
higher capacity fuse could cause damage and even start a fire.
(cont'd)
BLOWN
FUSE
REMOVER
Main Menu
▲
▼
Loading ...
Loading ...
Loading ...