Loading ...
Loading ...
Loading ...
Cooling System (cont'd)
7. Loosen the air bleed bolt in the
thermostat housing, then fill the
radiator to the filler neck with the
coolant mixture. Tighten the
bleed bolt as soon as coolant
starts to run out in a steady
stream without bubbles.
8. With the radiator cap off, start the engine and let it run until
warmed up (fan goes on at least twice). Then, if necessary, add
more coolant mix to bring the level back up to the filler neck.
9. Put the radiator cap on, then run the engine again and check for
leaks.
FILLER
NECK
Fill to here
Main Menu
▲
▼
Loading ...
Loading ...
Loading ...