Loading ...
Loading ...
Loading ...
Fasten Seat Belt Warning Light and Warning Beeper
Lap Belt Warning Indicator:
Both the light and the
warning beeper will go on for about
six seconds if the ignition switch is
turned on when the driver's lap belt
is not fastened. The beeper will not
go on if the driver's lap belt is
fastened, but the warning light will
come on for about six seconds each
time, to remind the driver to have
passengers put their belts on.
Automatic Shoulder Belt Warning Indicator:
The warning light will come on if either of the automatic shoulder
belts is unlatched with the ignition ON. The beeper will sound for
approximately six seconds while the warning light is ON. Relatch the
belt: the light should go off when the belt is latched.
The warning light will also come on while the shoulder belt buckle
moves from its front off position to its rear locked position.
Automatic Shoulder Belt Malfunction Indicator:
The warning light will flash and the beeper will sound rapidly if either
shoulder belt buckle stops before completing its full cycle (see page
106 for normal operation).
NOTE:
If the shoulder belt's tensioner mechanism locks and prevents the
buckle from moving fully forward when you want to get out,
recycle the system by closing the door and reopening it.
The buckle should move fully forward; if it does not, recline the
seat-back and use Emergency Belt Release (see page 10 ).
When the system does not function by either method, have the
system checked by an authorized Honda dealer.
If the lights and beeper do not function at all or if they come on
even with the belts latched and doors fully closed, it indicates a
malfunction in the seat belt system. In the event of a collision,
severe personal injury could result. The system should be checked
immediately by an authorized Honda dealer.
(cont'd)
Main Menu
▲
▼
Loading ...
Loading ...
Loading ...