Loading ...
Loading ...
Loading ...
On-Screen Display Menu
Example
Smart TV (Continue)
Wallpaper
Activating the function will display still images when the TV is
in standby mode.
Wallpaper Mode
Configures Wallpaper Mode settings.
Off:Nothing will be displayed.
Picture:Still images will be displayed when the TV is in
standby mode.
Clock: The clock will be displayed when the TV is in
standby mode.
Configure the clock settings. (For the UQ17U, TQ15U,
SQ17U, SQ15U, SQ10U, EQ10U and UD1U models)
(See page 4-24.)
NOTE
The clock mode can only be used when a network
connection has been established.
Finish configuring the network settings.
After you set the time once, the clock will continue to
operate even if you disconnect from the network.
However, you cannot switch the daylight saving time
setting when disconnected from the network.
Data Source
For the wallpaper, you can select either the still images pre-
installed in the TV or your favorite still images stored in the
USB memory device or SD memory card *1.
Pre-Installed: The images pre-installed in the TV will be
displayed in a slideshow.
USB or SD/SDHC/USB*1: Your favorite images stored for
the wallpaper will appear.
If only a single still image is stored in the USB memory
device or SD memory card *1, that image will be displayed
as the wallpaper. When there are multiple still images in
the memory, all the images will be displayed in a
slideshow.
NOTE
Images are displayed in 3-minute intervals as a slideshow.
When the TV is in Wallpaper mode, you can turn off the TV
by pressing and holding POWER on the TV for 5 seconds.
- Just before the TV turns off, the last image shown
when the TV was turned off appears briefly.
- Your settings may not be saved in some cases.
When you display images by using the USB memory
device or SD memory card *1:
Create a folder named "WP" in the root directory of the
USB memory device or SD memory card *1 (the first
directory when the USB memory device or SD memory
card *1 is opened), and store into the folder the still
images you want to display for the wallpaper.
You must insert the USB memory device or SD memory
card *1 to the TV before turning off the TV.
If there are images on the USB memory device or SD
memory card *1 but they do not appear on the screen,
switch to USB mode or SD mode and check whether the
image files on the USB memory device or SD memory
card *1 are shown correctly.
Timer Setting
You can set the length of time the TV will remain in the
Wallpaper Mode.
3 hours/6 hours/12 hours/24 hours
NOTE
No buttons except for POWER work even while the still
images are being displayed.
If the ready-for-use USB memory device or SD memory
card *1 is not inserted, the still images pre-installed in the
TV will be displayed in a slideshow even when "Data
Source" is set to "USB" or "SD/SDHC/USB"*1.
Because the USB memory device or SD memory card *1
cannot be detected immediately after the TV is turned on
from standby mode, the wallpaper pre-installed in the TV
may be displayed even when "Data Source" is set to
"USB" or "SD/SDHC/USB"*1.
The still images will be displayed until the set time has
elapsed.
*1: For the UD1U only.
ENG 4-23
Loading ...
Loading ...
Loading ...