Loading ...
Loading ...
Loading ...
Using the Internet
Internet Setup
Perform the procedure below to make adjustments or to
confirm the settings for accessing the Internet.
1 Press MENU to display the MENU screen, and then press
ENTER.
2 Press / to select "Smart TV", and then press ENTER.
3 Press / to select "Internet Setup", and then press
ENTER.
4 Press / to select "Internet Connection" or "Interactive
Service", and then press ENTER.
Select "Internet Connection" when you make general
adjustments to connect to the Internet.
If you want to make settings to restrict access to the
Internet, then select "Interactive Service".
5 Press / to select a specific item, and then press
ENTER.
6 Press / (or / ) to select the desired setting, and then
press ENTER.
7 Press MENU to exit.
Internet Connection
You can connect your TV to the Internet using the setting item
"Internet Connection".
NOTE
On the UD1U model, you cannot operate the "Internet
Connection" function during 4K60P signal input. Operate
this function during the input of other types of signals
(such as Full HD).
Auto Setup
Adjustments for network connection will be made
automatically. Select "Wired" or "Wireless" and follow the
instructions displayed on the screen.
Automatic adjustments for wireless LAN connection can be
made only for the WPS method.
If your access point uses any other method, perform
"Manual Setup".
Select the desired connection method and follow the
instructions shown on the display.
Manual Setup
You can make adjustments manually for network connection.
Connection Type
Select the connection type.
Wired: The signal is detected and setup is performed
automatically. Use "IP Setup" to check and change the
settings as necessary.
Wireless: Configure the access point settings on "Wireless
Setup".
ENG 9-2
Loading ...
Loading ...
Loading ...