Loading ...
Loading ...
Loading ...
OPERATION
· Place the shelves firmly on their supports. Check that the refrigerator is
functioning properly before installing and filling it. An optional light switch is
inside the unit.
· Never put warm or hot food directly into the Bar Cooler.
There are several types of controller/thermostat for different models.
Please check which type of controller is on your unit.
ELECTRONIC THERMOSTAT
· During normal operation, the
controller display will
show the temperature inside the
refrigerator.
· A small indicator light
will illuminate under the “Cooling” symbol to confirm the fridge is in its normal
cooling mode and compressor is running.
· When temperature is reached and the compressor is in its “Off” cycle, no
indicator light will illuminate in the controller:
OPERATION OF THE CONTROLLER
To set the desired temperature of the fridge:
· Press the button once. A “beep” will sound and the display will start to
flash.
· Use the buttons to set to the desired temperature.
· Press again to complete the operation, or just leave it for 5-10 seconds
and the display will revert back to showing internal temperature while new
settings is saved.
Note: The fridge is built to automatically defrost and prevent any ice forming
on the evaporator. When in a “Defrost” cycle, the indicator light will illuminate
under the “Defrost” symbol:
Loading ...
Loading ...
Loading ...