Loading ...
Loading ...
above 30°C. The refrigerator meets the operating conditions according to the
standard EN 441-4 in climate class 4. A 10A fuse is fitted. Never replace with a
fuse rated higher than this.
· Do not allow children to play with the appliance or to sit on it or to hang onto
the door.
· Make sure there is a suitable power outlet (230 volts, 13 amps outlet) with
proper grounding to power the refrigerator.
· Do not store explosive substances such as aerosol cans with a flammable
propellant in this appliance.
· Ensure all vents are clear of obstruction particularly if the unit is built-in.
· Do not use mechanical devices or other means to accelerate the defrosting
process, other than those recommended by the manufacturer.
· Do not damage the refrigerant circuit.
· Do not use electrical appliances inside the food storage compartments of the
appliance, unless they are the type recommended by the manufacturer.
BEFORE USING FOR THE FIRST TIME, do not position this appliance with its
rear panel directly against a wall. For good circulation and operating efficiency,
the ventilation grills must never be blocked.
Remove all packaging and place the Bar Cooler on a stable, secure and flat
surface.
Never use an extension lead. If the mains cable does not reach the nearest
socket, either rearrange your layout or ask a qualified electrician to fit a new
socket.
If the power is cut off, wait for at least 5 minutes before plugging the unit in
again to avoid damaging the compressor.
Do not place combustible, explosive or volatile articles / items, corrosive acid
or alkali or liquid in glass containers into the chiller. Always exercise caution
when adjusting the temperature.
IMPORTANT: Allow the refrigerator to stand upright for 24 hours before
plugging it in.
Loading ...
Loading ...
Loading ...