Loading ...
IMPORTANT SAFETY INSTRUCTIONS
Before switching on your Bar Cooler for the first time, read the information in
this Users’ Manual carefully. Keep this booklet in a safe place for future
reference. If you ever sell you appliance, hand this manual to the new owner.
The manufacturer does not accept responsibility for any damages that may
arise from failure to follow the instructions in this manual.
· Do not use damaged appliances. If you are in any doubt, consult an
authorized service center agent.
· Connection and installation of your Bar Cooler are to be carried out in strict
compliance with the manual’s guidelines.
· For safety purposes, the appliance must be properly earthed in accordance
with specifications.
· Do not damage any parts of the appliance which carry refrigerant by piercing,
perforating, crushing, twisting or scraping. If the refrigerant comes into contact
with the eyes, it may cause serious eye injury.
· Always remember to unplug the appliance before cleaning. Never unplug
your appliance by pulling on the power cable. Always grip the plug firmly and
pull straight out from the socket. Always check that the plug and cable are
undamaged.
·
All repairs must be carried out by qualified service agents. Inadequate repairs
may be dangerous. Never try to repair the Bar Cooler yourself.
· Should the cover of the interior light of the fan fall off or break, switch the Bar
Cooler off immediately and replace the cover.
· Ensure your chosen location has a flat and stable surface. The unit may be
leveled by turning either or both of the adjustable feet in the front corners.
·
Check the unit is level using a spirit level.
· Do not obstruct or cover the ventilation aperture.
· Do not position this appliance with its rear panel directly against a wall.
Maintain a gap of at least 50mm between the appliance and any adjacent wall.
· Position the Bar Cooler away from heat sources. The Bar Cooler should be
placed in a well-ventilated and protected from moisture or extreme heat or cold.
Note that the refrigerator may not function properly if the temperature rises
Loading ...
Loading ...
Loading ...