Loading ...
Loading ...
Loading ...
Drive Chain u Adjusting the Drive Chain Slack
73
Maintenance
Adjusting the Drive Chain Slack
Adjusting the chain requires special tools.
Have the drive chain slack adjusted by your
dealer.
1.
Shift the transmission to Neutral. Stop the
engine.
2.
Place your motorcycle on the side stand
on a level surface.
3.
Support your motorcycle securely and
raise the rear wheel off the ground using
a maintenance stand or a hoist.
4.
Loosen the bearing holder pinch bolt.
5.
Turn the bearing holder clockwise or
counterclockwise to obtain the proper
chain slack with the pin spanner.
6.
Chekc the drive chain slack.
2
P. 72
7.
Tighten the bearing holder pinch bolt to
the specified torque.
8.
Recheck the drive chain slack.
If a torque wrench is not used for this
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque: 65 lbf·ft (88 N·m, 9.0 kgf·m).
Bearing holder Bearing holder
pinch bolt
Pin spanner
Loading ...
Loading ...
Loading ...