Loading ...
Loading ...
Loading ...
Engine Oil u Changing Engine Oil & Filter
61
continued
Maintenance
1.
If the engine is cold, idle the engine for 3
to 5 minutes.
2.
Turn the ignition switch off and wait for
2 to 3 minutes.
3.
Place on a firm, level surface and lower
the side stand.
4.
Place a drain pan under the drain bolt.
5.
Remove the oil fill cap, drain bolt, and
sealing washer to drain the oil.
6.
Remove the oil filter guard by removing
the bolts and washers.
7.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
Drain bolt
Sealing
washer
Rubber
seal
Oil filter
Oil filter guard
Washer
Bolts
Washer
Loading ...
Loading ...
Loading ...