Loading ...
Loading ...
Loading ...
Winding thread onto the bobbin
Slide the bobbin winding spindle to the right.
6
Stop the machine after you have wind the
appropriate length of thread onto the bobbin.
This is how you wind thread onto an empty bobbin (Make sure the needle thread is not be threaded ).
7
Slide the bobbin winding spindle back to the
left and remove the bobbin from the spindle.
Be sure to use metal bobbins.
Caution
3
4
1
Place a spool of sewing machine thread onto
the thread spindle and place the thread cap,
winding the bobbin
* Be careful because the
needle will move up and
down.
2
8
Cut the bobbin thread
As shown in the drawing, the thread passes
through the bobbin hole, and is winded 3-4
times to the right around the bobbin.
Align the groove in the center of the bobbin
with the fitting on the bobbin thread winding
spindle and press down.
Cut the thread
short.
Replacing the needle and thread
or place the thread spool on the desk( If the
thread spool is big .)
10
Thread cap
Thread spindle
5
Move the
switch to
.
"
I " or "II " to start
Loading ...
Loading ...
Loading ...