Loading ...
Loading ...
Loading ...
7
Attach the hook cover plate.
Threading the bobbin thread
Thread the upper thread before threading the bobbin thread.You will not be able to bring up the bobbin
thread unless you have already threaded the upper thread.
1
2
3
4
5
6
Rotate the toward you hand wheel
(counterclockwise) to raise the needle to its
highest position.
Lift the presser foot lifter.
Pull the hook cover plate forward to remove it.
Pull out about 10 cm of thread from the bobbin
and insert the bobbin so it winds to the right.
Hold the end of the upper thread and rotate the
hand wheel toward you (counterclockwise) while
pulling on the upper thread until the bobbin
thread emerges from the bobbin thread hole.
Pull the bobbin thread when it emerges from
the bobbin thread hole.It's easier to pull the
thread out if you use a rod with a small tip.
Pass the upper and bobbin threads to the rear
under the presser foot, pulling them out together
about 10 cm.
See the instructions on the next page for winding thread onto an empty bobbin.
Note
The upper and bobbin thread must be correctly
installed. Sew a test piece to make sure the machine
is sewing correctly and then begin sewing your project.
Be sure to use metal bobbins.
Caution
Upper
thread
Bobbin
thread
gently
Replacing the needle and thread
9
Loading ...
Loading ...
Loading ...