Loading ...
Loading ...
Loading ...
76 Servicing Your Honda
Piston/Piston Rings/Piston Pin
Cylinder Head Removal
1. Clean the area above the engine before
disassembly to prevent dirt falling into the
engine.
2. Drain the radiator coolant after cooling the
motorcycle (page 143).
3. Remove the seat and hang the fuel tank (pages
33, 34).
4. Remove the muffler (page 100) and subframe
(page 36).
5. Remove the exhaust pipe (page 102).
6. Remove the spark plug (page 67).
7. Remove the cylinder head cover (page 68).
8. Set the piston at TDC on the compression
stroke (page 68).
9. Remove the camshaft holder, camshaft, valve
lifters and shims (page 70).
(1) ECT sensor connector
11. Loosen the radiator hose clamp screw (2) and
disconnect the radiator hose (3).
(2) radiator hose clamp screw
(3) radiator hose
(3)
(2)
10. Disconnect the ECT sensor connector (1).
(1)
(4) shock absorber upper nut
(5) bolt
13. Loosen the insulator band screw (6) and pull
the throttle body (7) out from the insulator
(8).
Do not hang the throttle body and support it with
a suitable strap.
(6) insulator band screw
(7) throttle body
(8) insulator
(7)
(6)
(8)
12. Remove the shock absorber upper nut (4) and
bolt (5).
(4)
(5)
Loading ...
Loading ...
Loading ...