Loading ...
Loading ...
Loading ...
49-5000434 Rev. 2 11
4. PREPARE THE CASE
A.
Attach the top rail gasket to
the bottom of the top rail.
B. Install the top mounting rail with 4 type A screws
from the inside of the case. Press firmly to drive
the screws into the gasket and through the top
mounting rail.
Installation Instructions
INSTALLATION INSTRUCTIONS
3. PREPARE THE AIR
CONDITIONER (continues)
E. Remove the ground screw from the left side of
the case. Keep it in a safe location.
NOTE: %HVXUHWRVDYHWKLVVFUHZ<RXZLOO
need them later in the installation.
F. Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case. Do not pull or lift
on the foam discharge area.
FRONT
Do not pull
or lift in
this area—
damage to
the unit may
result
4. PREPARE THE CASE
C. Slide each side retainer onto the edge of each
according panel. The figure shows the orientation
of each accordion panel and side retainer
assembly relative to the case from a top view of
the unit.
D. Slide the left and right accordion panels into the
top and bottom mounting rails.
E. Attach the side retainers to the case using 6 type A
screws.
WINDOW FILLER PANEL
WINDOW FILLER PANEL
SIDE RETAINER
SIDE RETAINER
Top mounting rail
Top left
Top right
Top mounting rail
%RWWRPPRXQWLQJUDLO
Loading ...
Loading ...
Loading ...