Loading ...
Loading ...
Loading ...
www.BISSELL.com
6
2
Battery LED Display
NOTE: Keep the temperature range between 4-40°C / 40-104 °F when charging the
battery, storing unit or during use.
WARNING Overcharging may cause battery damage, fi re or explosion.
TIP: Be sure to charge unit when there is less than 10% power left, one LED flashing red.
Your BISSELL® CrossWave® Cordless has a Battery LED light display that will turn on when
the unit is ON or charging to show the battery life status. The LED lights are white, but one
will be blinking red when the battery is at less than 10%.
Battery Status LED Color Light Behavior
100% to 70% White 3 lights on
69% to 40% White 2 lights on
39% to 10% White 1 light on
9% to 1% Red 1 light blinking, 2 second fade in and out
0% N/A Light off
Filling the Clean Water Tank
1
3 5
Lift the Clean
Water Tank
straight up to
remove from the
machine.
Unscrew the cap
from the Clean
Water Tank.
The Clean Water
Tank has two
measuring volumes
depending on the
amount of space you
would like to clean.
Screw the cap back onto the
Clean Water Tank.
On the back of the machine,
align Clean Water Tank with the
grooves and slide tank into place
until you hear a “click”.
The Clean Water Tank has a Large
Area volume and a Small Area
volume. Pick one of the measuring
volumes that best suits the space
that you would like to clean.
The Large Area fill lines are for
areas up to 700 sq ft.
The Small Area fill lines are for
areas under 350 sq ft.
Use warm (140°F/60°C max) tap
water and add the appropriate
BISSELL formula.
Loading ...
Loading ...
Loading ...