Loading ...
Loading ...
Loading ...
www.BISSELL.com
13
Disposing of the Batteries
WARNING
This product contains lithium-ion rechargeable batteries. According to Federal and
State regulations, removal and proper disposal of lithium-ion batteries is required.
For removal of the batteries in your Crosswave® Cordless, see instructions on this page.
NOTICE: Disconnecting the battery will destroy the appliance and void the warranty.
1 2
Cut the yellow positive (+) battery
wire with rubber-handled wire cutters
and wrap the end of the yellow cut
wire with electrical tape. Then, cut
the black wire and wrap the black cut
wire with electrical tape. DO NOT CUT
THE TWO WIRES AT THE SAME TIME.
Then disconnect the battery wire
connector and wrap the connector
with electrical tape.
With a Phillips-head screwdriver,
remove the 6 screws on the back of
the unit. Then, lift off the back cover.
NOTE: Keep Battery Pack together –
DO NOT separate individual batteries.
For specific disposal instructions of
batteries, please contact the RBRC
(Rechargeable Battery Recycling
Corporation) at 1-800-822-8837 or visit
www.Call2Recycle.org.
Before proceeding, ensure that:
• The unit is disconnected from the 3-in-1 Docking Station
• The Clean and Dirty Water Tanks are empty or removed from the unit.
• You have a Phillips-head screwdriver, electrical tape and rubber-handled wire cutters.
All required for disassembly.
3
Using a Phillips-head screwdriver,
remove the 4 screws on the sides of the
battery pack. Then, remove the battery
pack from the unit.
Loading ...
Loading ...
Loading ...